Use a trustworthy reference ruler
Choose an undamaged physical ruler with clear millimetre marks. Place it on a flat, well-lit surface, then put the iPhone beside it so the two scales run parallel rather than meeting at an angle.
Compare several centimetres instead of judging a single mark. A scale that looks right over a short distance can reveal a small spacing difference farther along.
Match the on-screen scale in Infinite Ruler
Open Calibrate from the ruler controls, place the reference ruler against the phone’s measuring edge and choose Start Calibration. Use Smaller or Larger until the on-screen marks align with the physical marks, then tap Done.
Infinite Ruler saves the calibration for that phone. You can return to calibration later or reset the adjustment if you want to begin again.
- Place a physical ruler against the phone’s measuring edge.
- Open Calibrate and tap Start Calibration.
- Check that the zero points and several later marks line up.
- Tap Smaller or Larger in small increments.
- Tap Done only when the two scales remain aligned across the comparison distance.
Measure from the object, not the phone body
The end of the glass, the phone frame and the edge of a case may not share exactly the same position. Use the movable zero when the physical starting point cannot sit directly beside the default zero mark.
For the distance between two visible points, show the A and B markers and place one on each point. The app displays the live distance between them in your selected unit.
Choose useful units and precision
Use centimetres for decimal metric measurements. In inches, Infinite Ruler can display fractional precision at 1/8, 1/16 or 1/32 of an inch.
More displayed subdivisions do not guarantee a more accurate physical result. Choose a precision you can place and read reliably, then keep the phone flat and parallel to the object.
Recheck when the measuring setup changes
Repeat the comparison if the scale appears wrong after changing phones, reinstalling the app or significantly changing how the phone sits beside an object. A quick check is also sensible before any measurement where a few millimetres matter.
Infinite Ruler is intended for convenient everyday measurements. Calibration improves the scale, but it does not turn an iPhone into a certified measuring instrument.